BRONZE SAFETY VALVE WITHOUT LEVER

Bronze Safety Valve Without Lever – 10 Bar / 16 Bar / 20 Bar | Screwed Type

Mustafa Ashqar Trading L.L.C. (MATC), Dubai, UAE supplies Bronze Safety Valves Without Lever, available for enquiry with 10 bar, 16 bar and 20 bar set pressures, for overpressure protection in compatible industrial pressure systems.

A bronze safety valve without lever is an automatic, spring-loaded pressure-relief device designed to open when the system pressure reaches its calibrated set pressure. It discharges fluid through an outlet to help prevent pressure from rising beyond the protected equipment’s allowable limits.

Unlike lever-operated safety valves, this design features an enclosed cap without an external manual lifting lever, offering a compact arrangement for installations where manual lifting is not required or permitted.

Typical applications may include compressed-air systems, pressure vessels, industrial utility equipment, water systems and selected boiler or steam installations, provided the specific valve is certified for the medium and duty.

💥 Available Set Pressure Options

Set Pressure

10 bar

1.0 MPa

Set Pressure

16 bar

1.6 MPa

Set Pressure

20 bar

2.0 MPa

These are set-pressure variants, not PN pressure classes. Set pressure, maximum allowable valve pressure, relieving capacity and operating temperature are different specifications and must be verified separately.

📏 Available Sizes – Enquiry Range

Nominal Size DN Equivalent Connection
1/4″ DN8 Screwed
3/8″ DN10 Screwed
1/2″ DN15 Screwed
3/4″ DN20 Screwed
1″ DN25 Screwed
1-1/4″ DN32 Screwed
1-1/2″ DN40 Screwed
2″ DN50 Screwed
2-1/2″ DN65 Model-dependent
3″ DN80 Model-dependent
4″ DN100 Model-dependent

⚙️ Key Features & Characteristics
– Bronze body construction: Provides mechanical strength and corrosion resistance for compatible operating media.
– Spring-loaded pressure relief: Opens automatically when the inlet pressure reaches the calibrated set pressure under specified conditions.
– Without lifting lever: Enclosed cap design with no external manual test lever.
– 10 / 16 / 20 bar set-pressure options: Allows selection for different protected-system requirements.
– Automatic reseating: The valve closes again when pressure falls sufficiently, according to its blowdown characteristics.
– Screwed connection options: Compact installation with manufacturer-specified inlet and outlet threads.
– Precision-calibrated spring: Controls opening pressure within the valve’s certified tolerances.
– Compact construction: Suitable for selected industrial machinery and pressure-system installations.
– No external power required: Operates mechanically through fluid pressure and spring force.
– Tamper-resistant adjustment options: Certain models have sealed or lockable calibration arrangements.
📋 Typical Technical Specifications
Specification Details
Product Name Bronze Safety Valve Without Lever
Supplier MATC – Dubai, UAE
Valve Type Spring-Loaded Safety / Pressure Relief Valve
Body Material Bronze / Gunmetal Copper Alloy
Bonnet / Cap Bronze / Manufacturer-Specified Material
Disc Material Bronze / Stainless Steel / Specified Alloy
Spring Material Spring Steel / Stainless Steel, model-dependent
Seat Type Metal / Soft Seat, model-dependent
Set Pressure Options 10 bar / 16 bar / 20 bar
Pressure Setting Factory-Calibrated or Approved Calibration
Operating Mechanism Direct Spring-Loaded
Lifting Lever Not Provided
Connection Screwed, model-dependent
Thread Options BSP / NPT, subject to manufacturer
Inlet / Outlet Sizes Manufacturer-Specified
Discharge Capacity Certified Value Required
Reseating / Blowdown Manufacturer-Specified
Operating Temperature Manufacturer-Specified
Compatible Media As Certified for Selected Model
Applicable Standards Manufacturer- and Application-Specific
Primary Function Overpressure Protection

Standards and certification: Depending on the application, relevant requirements may include EN ISO 4126, ASME Section VIII or other jurisdiction-specific pressure-equipment rules. Compliance must be established for the exact valve model and intended installation.
🔄 How a Bronze Safety Valve Without Lever Works
Simplified conceptual illustration of a spring-loaded relief valve; not a certified sectional drawing or installation schematic.
1. Normal operation: The spring holds the disc against its seat while the system pressure remains below the valve’s opening threshold.

2. Set pressure reached: Increasing inlet pressure generates sufficient force to overcome the spring preload, initiating valve opening.

3. Pressure relief: The valve releases fluid through its outlet. The actual lift and relieving capacity depend on its design and certified performance.

4. Reseating: Once pressure falls below the specified reseating pressure, the spring closes the disc.

The valve must be correctly sized to discharge the required flow during the credible overpressure scenario. Set pressure alone is not sufficient to select a safety valve.
💪 Advantages of Bronze Safety Valves Without Lever
– Automatic protection against excessive pressure.
– Compact design without an external lifting lever.
– Mechanical operation without electricity.
– Calibrated set-pressure configurations.
– Durable construction for compatible media.
– Automatic closing after pressure relief.
– Suitable for selected industrial pressure systems.
– Reduced external moving parts.
– Can be incorporated into pressure-equipment protection arrangements when appropriately certified.
⚠️ Disadvantages & Technical Considerations
– Correct sizing is essential: An undersized valve may fail to relieve sufficient pressure.
– Application approval: A leverless design is not acceptable for every boiler, steam or pressure-vessel installation.
– Discharge piping: Backpressure and outlet restrictions can affect relief performance.
– Calibration integrity: Unauthorized adjustment can compromise protection.
– Set-pressure selection: Must account for the protected equipment’s maximum allowable working pressure and applicable code.
– Material compatibility: Bronze, seat and spring materials must be suitable for the operating medium.
– Maintenance: Periodic inspection, testing and recertification may be required.
– Not a pressure regulator: A safety valve is an emergency or protective device, not a continuous pressure-control valve.
– Not automatically suitable for gas or steam: Certification must cover the specific medium and service conditions.
🏭 Common Applications
Industry / Application Typical Function
Compressed Air Systems Overpressure protection
Industrial Pressure Vessels Relief of excess pressure
Air Receivers Pressure safety, where approved
Water Pressure Systems Protection against excessive pressure
Industrial Machinery Equipment overpressure protection
Pumping Systems Pressure relief where suitably designed
HVAC Utility Systems Protection of specified pressure equipment
Marine Auxiliary Systems Pressure relief, subject to marine approvals
Steam / Boiler Equipment Only where expressly certified and code-permitted
General Industrial Utilities Automatic pressure protection

🔄 Bronze Safety Valve With Lever vs. Without Lever
Feature Without Lever With Lever
Pressure Relief Automatic Automatic
Spring Loaded Typically Yes Typically Yes
External Manual Lifting Lever No Yes
Manual Lift Testing Not via External Lever Possible Where Permitted
Cap Construction Enclosed Lever Assembly
Suitability Application-Specific Application-Specific
Certification Required Yes Yes

Selection guidance: The choice between a lever-type and leverless safety valve must follow the applicable pressure-equipment code and manufacturer’s certification. A leverless valve should not be substituted for a lever-operated valve where manual lift capability is required.
🇦🇪 Why Choose MATC Bronze Safety Valves in Dubai?
Mustafa Ashqar Trading L.L.C. (MATC) is a Dubai-based stockist and supplier of industrial valves, pressure-control equipment, pipes, fittings, flanges and pipeline accessories.

We serve customers across the oil & gas, marine, petrochemical, HVAC, construction, water treatment and general industrial sectors.

Our Bronze Safety Valve Without Lever – 10 Bar / 16 Bar / 20 Bar category supports enquiries for pressure-protection applications requiring specific set pressures and certified valve performance.

For an accurate quotation, provide the set pressure, inlet and outlet size, connection type, operating medium, temperature, required relieving capacity, applicable standard and quantity.

Related Products