STEEL REBAR
🏗️ Steel Rebar – High-Strength Reinforcement Steel Bars (TMT / Deformed Bars)
MATC Steel Rebars, supplied by Mustafa Ashqar Trading L.L.C., Dubai, U.A.E. 🇦🇪, are high-strength steel reinforcement bars designed to strengthen concrete structures and improve their resistance to tensile and bending forces.
Widely used in residential and commercial buildings, bridges, foundations, columns, beams, slabs and large-scale infrastructure projects, steel rebars are essential components of reinforced concrete construction.
The ribbed surface of deformed reinforcement bars provides improved mechanical bonding with concrete, helping transfer structural loads and maintain long-term performance. ⚙️🦾
📏 Available Sizes
Common nominal diameters for reinforcement steel bars
6 mm
8 mm
10 mm
12 mm
14 mm
16 mm
18 mm
20 mm
22 mm
25 mm
28 mm
32 mm
36 mm
40 mm
50 mm
Size availability depends on grade, applicable standard and supplier.
Standard Lengths: 6 metres, 12 metres and project-specific cut lengths, subject to availability.
Common Grades: ASTM Grade 60 / Grade 75, BS 4449 B500B / B500C and equivalent specifications, depending on the product supplied.
⚙️ Key Characteristics
-
🦾 High tensile strength helps reinforced concrete resist tensile forces.
-
🏗️ Ribbed and deformed surface improves mechanical anchorage within concrete.
-
🔩 Excellent suitability for reinforced concrete beams, columns and slabs.
-
📐 Consistent nominal diameters support structural design and fabrication.
-
🔧 Suitable for cutting and bending in accordance with applicable standards.
-
💪 Ductile grades allow controlled deformation before failure.
-
🏢 Available in different grades for residential, commercial and industrial construction.
-
📋 Material test certificates can be requested for traceability and verification.
-
🛡️ Special corrosion-resistant options may be available for demanding environments.
📋 Typical Technical Specifications
| Parameter | Specification |
|---|---|
| Product | Steel Reinforcement Bar (Rebar) |
| Supplier | MATC – Dubai, U.A.E. |
| Material | Carbon Steel / Low-Alloy Reinforcing Steel |
| Bar Type | Deformed / Ribbed |
| Diameter Range | 6 mm – 50 mm, depending on specification |
| Standard Lengths | 6 m / 12 m options |
| Common Standards | BS 4449 / ASTM A615 / ASTM A706 |
| Typical Grades | B500B / B500C / ASTM Grade 60 |
| Yield Strength | Grade-dependent |
| Surface | Ribbed / Deformed |
| Finish | Black Steel / Special Coated Options |
| Application | Reinforced Concrete Construction |
| Inspection | Manufacturer’s Test Certificate, where specified |
📌 Technical Note: TMT is a manufacturing process, not a universal steel grade. Rebar grades and mechanical properties must be selected according to the applicable design code and project specifications. Weldability also depends on the grade and chemical composition.
💪 Advantages
-
🏗️ Excellent reinforcement for concrete structures.
-
🦾 High strength and load-bearing performance when properly designed.
-
🔩 Ribbed surfaces provide strong bonding with concrete.
-
📐 Available in numerous diameters and structural grades.
-
🔧 Can be cut and bent for different reinforcement arrangements.
-
💰 Economical for large-scale construction.
-
🛡️ Provides durable structural performance with adequate concrete cover and corrosion protection.
-
♻️ Steel is recyclable.
⚠️ Disadvantages / Considerations
-
🌧️ Carbon steel reinforcement can corrode when exposed to moisture, chlorides and other aggressive conditions.
-
🔥 Mechanical strength decreases at elevated temperatures.
-
⚖️ Large-diameter bars require suitable lifting and bending equipment.
-
🔧 Welding must follow the relevant grade and approved procedures.
-
📐 Proper concrete cover, spacing, anchorage and lap lengths are essential.
-
🧪 Material grade, traceability and mechanical properties must be verified for structural projects.
🚀 Common Applications
✔️ 🏢 Residential & Commercial Buildings ✔️ 🌉 Bridges & Flyovers ✔️ 🏗️ Foundations & Footings ✔️ 🧱 Reinforced Concrete Columns ✔️ 🏢 Beams & Floor Slabs ✔️ 🚇 Tunnels & Underground Structures ✔️ 🛣️ Roads & Infrastructure Projects ✔️ 🏭 Industrial Plants & Warehouses ✔️ 💧 Water Retaining Structures ✔️ ⚓ Marine & Port Infrastructure ✔️ 🏙️ High-Rise Construction
🇦🇪 Why Choose MATC Steel Rebars in Dubai?
MATC – Mustafa Ashqar Trading L.L.C. supplies industrial and construction-related steel products for contractors, fabricators, infrastructure developers and industrial customers across Dubai and the U.A.E.
For steel reinforcement bars, project quantities, diameter selection, grade requirements, technical documentation and quotations, contact our sales team.
MATC – ENERGY | POWER | PROGRESS
